Latest Blogs

Asphalt Paving Resurfacing In 8 Simple Steps

Ever wonder how asphalt paving resurfacing works? This transformative service is like getting new pavement at a fraction of the cost and time. It addresses widespread deterioration and can add many years to the life of your asphalt surfaces. Read on to learn more about how Bridgeport asphalt paving companies perform resurfacing.

How Do Paving Resurfacing Projects Start?

The first step is a thorough inspection. The best asphalt paving companies will assess your pavement to determine if resurfacing is a viable option. Contrary to popular belief, resurfacing isn’t something that all pavements will benefit from.

Surfaces need a structurally sound foundation. Contractors will also consider your pavement’s age, the extent of the surface damage, and other factors to determine if asphalt resurfacing in Bridgeport is the right move.

Do Contractors Need to Prepare the Pavement Before Overlays?

Asphalt resurfacing in Bridgeport does require some prep. Every project is different, but contractors typically clean and wash the asphalt before beginning their work. This helps streamline the process while preventing damage to the equipment.

Do Asphalt Companies Need to Remove Other Pavement Features?

Your Bridgeport asphalt paving likely has additional features, such as speed bumps, striping, wheel stops, and curbing. Most of these features will need to be removed before contractors can begin. Anything sitting on top of the surface must go. However, contractors typically don’t need to alter curbing.

The best asphalt paving companies will restore these features once resurfacing is complete.

How Do Bridgeport Asphalt Paving Companies Remove Damaged Material?

Asphalt paving companies start your project in earnest by pulverizing the upper layer of pavement. This process, called milling, is precise and controlled. Milling machines can remove material layer by layer, allowing contractors to pulverize just a few inches in multiple passes.

Milling leaves the foundation intact, allowing experts to reuse it for your new overlay. Teams work methodically, employing state-of-the-art equipment while removing milled asphalt for recycling.

What If There Are Any Deeper Problems?

After milling, asphalt companies will inspect the foundation layers. If there are any problems, now is the time to address them! The best asphalt paving companies will perform necessary repairs deeper within your pavement.

Contractors can address small-scale issues, but any extensive structural problems will disqualify your pavement from resurfacing.

How Do Contractors Prepare Milled Asphalt Paving for the Overlay?

Once repairs are complete, asphalt companies can apply a tack coat. This essential material helps to strengthen the bond between the existing foundation and the future overlay. Teams typically spray an asphalt emulsion over the remaining pavement, allowing it to cure a bit before proceeding to the next phase.

What’s Used for the Overlay During Asphalt Resurfacing in Bridgeport?

Next comes the overlay. The overlay is a fresh layer of hot asphalt applied directly onto your existing foundation. Experts use the same type of material used for new asphalt paving. It’s tough and pliable, and it requires thorough compaction.

The process is similar to standard asphalt paving. Teams lay and compact the hot material before it cools, creating a dense surface and smooth finish.

Does Asphalt Paving Resurfacing Need Time to Cure?

Asphalt resurfacing in Bridgeport does require some time to cure. The good news is that most surfaces are ready for traffic after just a few days. Like other forms of Bridgeport asphalt paving, your overlay will continue to cure over the course of 6 to 12 months.

Regular traffic will continue to compact it as it hardens. You can open your pavement up to vehicles and pedestrians after 24 to 48 hours of curing.

BlackTop Paving & Asphalt Sealcoating is eager to show you firsthand the benefits of resurfacing. We’re among the most trusted Bridgeport asphalt paving companies to offer resurfacing services, delivering superior results and top-tier customer service every step of the way. In addition to resurfacing, we’re available for new paving, repairs, sealcoating, striping, dirt work, snow plowing, drainage improvements, and more.

Give BlackTop Paving & Asphalt Sealcoating a call today at (304) 592-5509 to learn more and get your free project quote. If you prefer, you can email us at Erskineblacktopservices@gmail.com or use our online form.